SafeKit Video - Virtual IP address with load balancing and failover

Evidian SafeKit mirror cluster with real-time file replication and failover

• The SafeKit high availability software saves on Windows and Linux the cost of :
  1. external shared or replicated storage,
  2. load balancing boxes,
  3. enterprise editions of OS and databases
• SafeKit includes all clustering features: synchronous real-time file replication, monitoring of server / network / software failures, automatic application restart, virtual IP address switched in case of failure to reroute clients

• The cluster configuration is very simple and made by means of application modules. New services and new replicated directories can be added to an existing application module to complete a high availability solution
• All the configuration of clusters is made using a simple centralized web administration console
• There is no domain controller or active directory to configure as with Microsoft cluster

• The real-time replication is synchronous with no data loss on failure
• This is not the case with asynchronous replication

• After a failure when a server reboots, the replication failback procedure is fully automatic and the failed server reintegrates the cluster without stopping the application on the only remaining server
• This is not the case with most replication solutions particularly with replication at the database level. Manual operations are required for resynchronizing a failed server. The application may even be stopped on the only remaining server during the resynchonization of the failed server

• The replication is working for databases but also for any files which shall be replicated
• This not the case for replication at the database level

• The replication is based on file directories that can be located anywhere (even in the system disk)
• This is not the case with disk replication where special application configuration must be made to put the application data in a special disk

• The servers can be put in two remote sites
• This is not the case with shared disk solutions

• All SafeKit clustering features are working for 2 servers in remote sites. Replication requires an extended LAN type network (latency = performance of synchronous replication, bandwidth = performance of resynchronization after failure).
• If both servers are connected to the same IP network through an extended LAN between two remote sites, the virtual IP address of SafeKit is working with rerouting at level 2
• If both servers are connected to two different IP networks between two remote sites, the virtual IP address can be configured at the level of a load balancer with the "healh check" of SafeKit.

• The solution works with only 2 servers and for the quorum (network isolation between both sites), a simple split brain checker to a router is offered to support a single execution of the critical application
• This is not the case for most clustering solutions where a 3^rd server is required for the quorum

• The secondary server is not dedicated to the restart of the primary server. The cluster can be active-active by running 2 different mirror modules
• This is not the case with a fault-tolerant system where the secondary is dedicated to the execution of the same application synchronized at the instruction level

• SafeKit implements a mirror cluster with replication and failover. But it imlements also a farm cluster with load balancing and failover.
• Thus a N-tiers architecture can be made highly available and load balanced with the same solution on Windows and Linux (same installation, configuration, administration with the SafeKit console or with the command line interface). This is unique on the market
• This is not the case with an architecture mixing different technologies for load balancing, replication and failover

• SafeKit implements quick application restart in case of failure: around 1 mn or less
• Quick application restart is not ensured with full virtual machines replication. In case of hypervisor failure, a full VM must be rebooted on a new hypervisor with a recovery time depending on the OS reboot as with VMware HA or Hyper-V cluster

Evidian SafeKit farm cluster with load balancing and failover

• The solution does not require load balancers or dedicated proxy servers above the farm for imlementing load balancing. SafeKit is installed directly on the application servers in the farm. The load balancing is based on a standard virtual IP address/Ethernet MAC address and is working with physical servers or virtual machines on Windows and Linux without special network configuration
• This is not the case with network load balancers
• This is not the case with dedicated proxies on Linux
• This is not the case with a specific multicast Ethernet address on Windows

• The solution includes all clustering features: virtual IP address, load balancing on client IP address or on sessions, monitoring of server / network / software failures, automatic application restart with a quick revovery time and a replication option with a mirror module
• This is not the case with other load balancing solutions. They are able to make load balancing but they do not include a full clustering solution with restart scripts and automatic application restart in case of failure. They do not offer a replication option
• The cluster configuration is very simple and made by means of application modules. There is no domain controller or active directory to configure on Windows. The solution works on Windows and Linux

• If servers are connected to the same IP network through an extended LAN between remote sites, the virtual IP address of SafeKit is working with load balancing at level 2
• If servers are connected to different IP networks between remote sites, the virtual IP address can be configured at the level of a load balancer with the help of the SafeKit health check. Thus you can implement load balancing but also all the clustering features of SafeKit, in particular monitoring and automatic recovery of the critical application on application servers

• SafeKit imlements a farm cluster with load balancing and failover. But it implements also a mirror cluster with replication and failover.
• Thus a N-tiers architecture can be made highly available and load balanced with the same solution on Windows and Linux (same installation, configuration, administration with the SafeKit console or with the command line interface). This is unique on the market
• This is not the case with an architecture mixing different technologies for load balancing, replication and failover